This revolutionary surface not only adds strength, but also protects the overall fishing action during hot and cold temperatures. Trabucco Fishing Range Top of the range pole for competition fishing Pole 12,80 m in three separate tubes Structure made by 8 sections of High Modulus carbon Parallel butt sections sections nr. It is located at the base of the third section, and is intended to house the Strippa System bush, whose application must be carried out by the user.
It is advisable to start by making a very small hole 1 mm , to be gradually widened with an abrasive tip with a conical profile. In this way it will be easier to obtain a hole of the desired diameter, fractures will be avoided and the margin of the round window will be perfectly smooth.
In fact, it is coloured in light gray so as not to scare the fish that, looking towards the sky, would clearly distinguish it if it were dark in color.
Its taper is very fast, going from about 19 mm of its base to about 4,2 mm of the upper end, in cm of length. Such operation leaves an external trace along the section, just where the carbon sheet has been cut. Fishing with those indicators facing upwards makes the pole far more sharp and definitely stronger.
The elastic gets through the top sections of the pole and get off the side hole, located at the base of the section 3. The tension of the elastic is adjusted instant by instant, by pulling it out from the hole with the free hand or releasing it when the fish reacts with a sudden run.
CNX Carbon Nano Tubes it is an extreme material, characterized by an incomparable compactness, due to a very high ratio between the ultrafine High Modulus carbon sheets and the resins that cement the multiple layers. The nanometric resins are the only ones capable of penetrating into infinitesimal spaces, optimizing the cohesion between the fibers to obtain an extremely precise elastic response and an exceptional resistance. Thanks to the use of multi-axial carbon sheets, the X-Joint allow to obtain perfect action curves, absorbing all the torsions to which the blank is subjected, increasing the structural resistance and the response to stresses.
Definitely the best joints ever made! The weight of such connector is absolutely irrelevant, but its benefits can be immediately seen. The swivelling connector enables to link the rig without tangle risk. Make two loops on top of the rig line; one large, the other fairly small. Wrap the main loop around the tip string and tighten it.
To remove the rig, simply pull the small loop and it will be released. In addition to the classic spliced top section, with the solid carbon tip and the tangle free line connector, the Energhia XR is equipped with a second tubular top, suitable for sea fishing or to create a super-light bolo. Telescopic rod with lightweight and powerful blank Ideal for use in both fresh and salt water with medium lightweight rigs and lines with a maximum diameter of 0,25 mm Tubular top section, lightweight and strong Each rod include a wonderful rotating connector to be glued at the top end of the tip, preventing the line from tangling around it.
The Atomic offers the same fantastic line connector that enriches the top of the range Energhia XR series. Its body is made from stainless steel and includes a sort of super-swivel. On top side, it ends with a soft segment of braided line that allows you to connect the line, zeroing the risk of line tangles. A strong High Resistance carbon filament protects the Atomic FR blank from sudden shocks and excessive ovalization under stress, which could drastically compromise its career.
Slim telescopic rod with great power Ideal for both fresh and salt water with rigs up to 10 g and lines with a maximum diameter of 0,25 mm Each rod include a wonderful rotating connector to be glued at the top end of the tip, preventing the line from tangling around it Extremely sensitive tubular carbon top section Aluminum and rubber butt cap The Titan offers the same fantastic line connector that enriches the top of the range Energhia XR series.
Telescopic whips with fast action for speedy catch of small fish Tapered blanks made from CX-2 Nano-Tek carbon with low resin content Telescopic solid carbon tip Comfortable grip handle, covered by a thin rubber film Slick Surface Aluminium butt cap with rubber insert. The special finish of the inner sections is water repellent Slick Surface. Water flows away without weighing down the rod. Find out more on page Blanks made from S. High Resistance carbon material Compact closed length allows easy transport in any car Sharp action with maximum hooklink diameter 0,20 mm Joints reinforced by carbon crossed bands Tubular top section Rubberized, ribbed handle grip for nice control and comfort Aluminium butt cap with rubber shock absorber insert Sister series Heaven Bolo Master also available for with same sizes All Zest and Heaven joints are reinforced by carbon crossed bands, which are designed to protect those critical areas when the stress is particularly high.
Telescopic rod with peculiar short closed length, ideal for the use of rigs up to 6 g and lines with a maximum diameter of 0,20 mm Blank made from high resistance carbon S. R that provides maximum compression resistance Section joints are further reinforced by crossed carbon bands Progressive action, great for fishing both in fresh and salt waters Soft material coated handle that allows a comfortable grip and eases cleaning at the end of the fishing session Sensi Touch Tubular carbon top section, extremely sensitive Aluminum butt cap with rubber insert.
All Flare joints are reinforced by carbon crossed bands, which are designed to protect those critical areas when the stress is particularly high.
Very fast action telescopic rod, ideal for both sea and freshwater High Resistance Carbon S. The extreme lightness without forgetting resistance: an achievable task only if you have access to the nanotechnological resins that weld ultra-fine carbon fabrics, giving life to extraordinary cohesive structures, which X-Joint technology can coordinate at the best.
This is the cold technical content of our Energhia XLT, but are the emotions that make them unique: the sense of something exclusive, the feeling given by the action, balance, precision of response and the very modern cosmetics. The Energhia XLT are available just as blanks, thus without guides and reel seat, in order to allow their customization.
In addition to the internal butt cap, the Energhia XLT are equipped with a lightweight EVA cap to protect it from impacts and scratches. In addition, it is essential in the short range fishing or with light weight float rigs, one of the most exciting situations because fish plays its cards with a fast start. The red colour gives an immediate sense of sporting challenge, which the rod interprets with a balanced mix of strength and sweetness, to give and to ask in the right moments, carrying out prolonged fights with important fish.
And when it is vertical, with the landing net doing its duty, it calls the third section to help. Suggested hooklinks up to 0,18 mm. Suggested hooklinks up to 0,20 mm. The size 6 reel seat is an ALPS stainless steel model with rubber hoods and shock absorber. All this takes place through the deposition of a protective film on the frame, which seals and protects the steel without changing its structure, weight and technical specifications.
All accompanied by SiC rings. A further step forward for rods with very high performance and more reliable in every part! The plate reel seat is the best you can actually ask for, the tried and tested PacBay.
Made entirely of stainless steel with protective rubber profiles, it is resistant to wear and external agents, and is ergonomic and stylish at the same time. A name that has made the history of the Trabucco bolognese, which still today summarizes his great experience in rod design.
From the early fifties to today, the bolognese style has brought around the world the image of Italy as a country with a strong fishing vocation. Expands the range with ultralight but surprisingly powerful blanks, if compared to the slimness of their geometric profile. Thanks to the construction with one section less than the tradition, the weight has been strongly reduced, but the CX2 carbon technology grants same sharpness.
Versatile as a top match angler, able to perform a mixed bag fishing at medium range, but also to quickly adapt to the sudden pull of a bonus fish which must absolutely be landed. The presence of the eight meters rod in the series is important to tackle fairly deep rivers.
Highly reactive blanks, able to put in trouble Barbel and Carp, but also the more powerful marine fish. At first check, they give a feeling of power, but under load they draw a perfect curve. Great authority, therefore, both in casting and during the fight.
The Supreme BLS are optimally balanced to deal with any fishing condition in fresh water or sea. Steel and rubber size 6 plate reel seat.
The handle is covered by a soft rubber sleeve, finely knurled according to an elegant design. In addition to the internal butt cap, the Spectrum Bolo are equipped with a lightweight EVA cap to protect it from impacts and scratches.
Super soft monofilament designed for bolognese Very long casts and perfect bait presentation Good visibility for the angler Parallel spooling TPS. Scogliera fits the medium leg Sea Guide SiC Blank wrapped by crossed carbon guides, with tangle-free stainless steel K frame.
The plate wrapped reel seat of Scogliera is made Reinforced handle made from from stainless steel, with anti-corrosion treatcrossed carbon strips that make it ment. Special guides are wrapped on Frangente rods; they are able to resist saltwater corrosion much longer than any other guide in the market.
Wonderful from the aesthetic point of view, the interweaving of crossed carbon bands that wraps the handle plays the important role of making it indestructible.
Since ever, Atomic by Trabucco means power for long range casting and strength to successfully drive big fish to the landing net. Select your own Atomic and bring it to the water: fish will immediately realize who is the leader! Each one of these rods is designed to target a certain job. In fact, when loaded by same test weight, the five series react in a different way, confirming that they have been built to develop a specific power range.
The male side of all joints has been finely sanded with computer aided machine to obtain maximum precision. This prevents sticking when joints are wet, while at the same time it grants complete contact, avoiding any vibration. X-Cross Wrap carbon braiding. The whole blank af Atomic bolos, except top section, is wound by an high modulus carbon yarn protects it from accidental shocks. The nice cap, including a protective rubber insert, is made from aluminium to provide lightness and strength.
Pacific Bay reel seat. Size 7 to accept big sized reels. The sliding guide fitted on second section, wrapped on a carbon pipe, is a vital element for the distribution of the stress. Thanks to the fine art involved in its cosmetic design, the VIXIA name can be equally read from both sides!
In addition to the internal butt cap, the Prestige Bolo are equipped with a lightweight EVA cap to protect it from impacts and scratches. Reticular containers for the maintenance of maggots moving or glued in ideal temperature and breathing conditions. For transport, they can be inserted into each other concentrically, matrioska style. Extremely pleasant and firm grip, thanks to the elegant 3D design that characterizes the soft rubber which wraps the handle area.
Sharp action rods with high reliability and short closed length Size 6 plate reel seat, wrapped EVA tower to correctly space guides during transport Aluminium butt cap with rubber insert.
Telescopic rods designed for saltwater fishing with heavy floats or bombardas Ultra fast action for long range casting Natural cork handle, with aluminium and rubber screw butt cap Medium leg SS SiC guides, with stainless steel frame Sliding guides wrapped on carbon pipes, fitted on all sections Stainless steel screw reel seat with rubber lined hoods.
SiC Stainless steel frame guides help Frangente to succeed in saltwater fishing with heavy bombardas or floats; sliding guides wrapped on carbon pipe on all intermediate sections. Rods with allround action for fresh and saltwater fishing Tubolar top section Carbon yarn reinforcement wrapping.
Plate reel seat size 6 Aluminium butt cap with rubber insert. Telematch rods with fast action, ideal for floats or bombardas in fresh and salt water Handle coated with a transparent matt film allowing comfortable grip, also easing cleaning at the end of fishing session Medium leg HD SiC guides for fast heat dispersion Steel plate reel seat with rubber shock absorbers Aluminium butt cap with rubber insert.
The whole blank af Prestige, except top section, is wound by an high modulus carbon yarn protects it from accidental shocks. Rods with allround action for fresh and saltwater fishing Tubolar top New reel seat with Sensi Touch window Aluminium butt cap with rubber insert. Rod with fast progressive action, ideal for fresh and salt water Extremely quick and sensitive tapered tubular tip, able to cast heavy floats or bombardas Medium leg S-SiC guides with sliding guides on each section, wrapped on to carbon pipes Wrapped plate reel seat, with rubber shock absorber Aluminum internal screw cap, with removable EVA overcap for extra protection.
All guides feature SiC ring to provide maximum protection to the line and dissipate heat developed during fish fight. Beyond the lower cap threaded directly into the blank, the Atomic Telematch are equipped with a lightweight EVA cap that protects it from impact.
Rod with fast progressive action, ideal for fresh and salt water Extremely quick and sensitive slim tubular tip, able to cast heavy floats or bombardas Medium leg SiC guides with tangle-free K frame design Sliding guides on each section, wrapped on to carbon pipes Ergonomic Sea Guide graphite screw reel seat, with contact windows on the blank. Telescopic rods with progressive parabolic action, perfect for use in both fresh and salt water Extremely fast and sensitive tubular tip, capable of casting heavy weights Anatomic graphite screw reel seat, large enough to accept size reels Aluminum butt cap with rubber insert.
Telescopic rods with progressive parabolic action, perfect for use in both fresh and salt water Extremely fast and sensitive tubular tip, capable of casting heavy weights S-SiC guides, with sliding guides on each section, wrapped on to carbon pipes Natural cork handle, with anti-slip EVA inserts for excellent grip and easy cleaning after use Graphite screw reel seat.
Rods with allround action, suitable both for fresh and saltwater fishing Tubular top section with sliding guides wrapped on carbon pipes Medium leg SiC guides with stainless steel frame Innovative handle grip, rubberized and ribbed according to a fine design Wrapped plate reel seat size 6, made from steel and rubber. Rods with allround action, suitable both for fresh and saltwater fishing Tubular top section with sliding guides wrapped on carbon pipes Innovative handle grip, rubberized and ribbed according to a fine design Wrapped plate reel seat size 6, made from steel and rubber.
Rods with medium power action, suitable both for fresh and saltwater fishing Tubular top section with sliding guides wrapped on carbon pipes Medium leg S-SiC guides Natural cork grip, with EVA inserts Screw reel seat made from steel and rubber. Telematch rods with perfect parabolic action, suitable for use in both fresh and salt water Blanks made from S.
High Resistance carbon Extremely sensitive tubular tip, able of holding weights up to 50 grams Wrapped S-SiC guides, with sliding guides wrapped on to carbon pipes Cork handle with graphite and steel screw reel seat Aluminum butt cap with rubber insert. High Resistance carbon Extremely sensitive tubular tip Wrapped S-SiC guides, with sliding guides wrapped on to carbon pipes.
All Energhia XR fit match SiC guides offering exceptional properties of friction reduction and heat dispersion. Fast action rods, perfect for long range match fishing with extreme accuracy Blanks made from High Modulus carbon, with Twist Free technology to contrast torque generated during the cast High precision spigot joints made by X-Joint technology for a perfect action curve Light and strong Match SiC guides, able to reduce line friction and dissipate heat Natural high grade cork handle with high density EVA grips Fuji IPS graphite screw reel seat, with stainless steel hood Rubber butt fighting cap.
Fast action rods, perfect for medium range canal fishing or with the slider Blanks made from High Modulus carbon, with Twist Free technology to contrast torque generated during the cast High precision spigot joints made by X-Joint technology for a perfect action curve Light and strong Match SiC guides, able to reduce line friction and dissipate heat Natural high grade cork handle with high density EVA grips Fuji IPS graphite screw reel seat, with stainless steel hood Rubber butt fighting cap.
The Fuji original screw reel seat is nicely set between the high-density EVA front grip and natural cork handle. Rods with fast and progressive action, with Casting weight up to 25 g Blanks made from CX-1 Micro Pitch High Modulus carbon, with Twist Free technology to contrast torsion while casting Precise, reinforced X-Joint joints that allow to absorb stress and protect them during traction Sea Guide SiC Match single leg guides double legs in the lower area Natural cork handle with EVA inserts Tapered butt grip made from EVA, with durable hybrid cork cap including Trabucco medal.
So Hidrogen performs like a knife, rather than - in a mess - like a whip. Semi-parabolic action, ideal for medium and long range casting within m. Supplied with 3 spineless solid carbon quiver tips with different actions, contained in a protective tube to prevent breakages during transport Screw reel seat with matt rubber finish Hook keeper made of round ring Powerful and progressive action specially designed for fast running rivers and canals, also suitable to long range lake fishing Supplied with 4 spineless solid carbon quiver tips with different actions Colouring system for the final part of the tip, which increases visibility, instantly sensing even the slightest movements in case of shy bites.
Powerful and progressive action specially designed for long distance fishing with feeders up to g Supplied with 4 spineless solid carbon quiver tips with different actions, contained in a protective tube to prevent breakages during transport. Extremely powerful action, specially designed to face fast running canals and rivers or fishing with heavy feeders up to g Supplied with 3 solid carbon tips with different actions in a protective tube for easy and safe transport.
The spare tips for Ultimate Stillwater feeder are also available separately. Powerful, parabolic progressive action, perfect to fish in the deep and fast rivers with heavy feeders Supplied with 2 long tips: one spliced with solid carbon tip, inserted and wrapped; the other straight tubolar Handle dressed with rubber sleeve, shaped on top to form a fighting grip and on the bottom to create a firm casting grip Screw reel seat, reversed to resist extreme pulls. Progressive parabolic action for commercial fishing, able to handle feeders up to 90 g New coloring system for the final part of the tips that increases visibility, enhancing the slightest bite A special Tape Grip is applied around the joints to ease assembling and dismantling New hook keeper made of a reclining round ring, allowing easy hook fit.
Semi-progressive action designed for the method or pellet feeder, with weights within 90 g and casting over 60 m New coloring system for the final part of the tips that increases visibility Tape Grip is applied around the joints to facilitate the assembling and dismantling New hook keeper made of reclining round ring.
Semi-progressive action designed for the method or pellet feeder, with weights within 90 g and casting over 60 m New coloring system for the final part of the tips that increases visibility, enhancing the slightest bite A special Tape Grip is applied around the joints to ease assembling and dismantling New hook keeper made of a reclining round ring, allowing easy hook fit.
Universal Quiver tips for feeder rods High Modulus Carbon blanks Single leg micro guides with SiC ring Technical data diameter, length, action, power printed on each quiver Individual packing with Euro slot. Progressive hyper-parabolic action able to handle feeders up to 35 g weight and ideal for extremely thin lines Natural cork handle with nice tapered EVA grip for a good control and easy cleaning at the end of the fishing session SiC guides with K design tangle-free frame, perfect for use of braided lines Special ergonomic screw reel seat with contact windows on the blank and EVA fore grip.
Progressive action able to handle feeders up to 75 g weight Natural cork handle with nice tapered EVA grip for a good control and easy cleaning at the end of the fishing session SiC guides with K design tangle-free frame, perfect for use of braided lines Special ergonomic screw reel seat with contact windows on the blank and EVA fore grip. For the same reason, the Trabucco brand even offers a nice Precision reel, equipped with a double line clip! Super-powerful action, perfect for fast river fishing for Barbel, Carp and Catfish Designed for heavy pre-baiting with large size feeders 5x7 cm , even at great distance Precise and reinforced joints with crossed carbon bands that absorb stress and protect them during cast or traction Steel and rubber screw reel seat, integrated into the handle.
Allround action rod, designed to fish with feeders up to 60 g weight Telescopic carbon structure Joints reinforced by carbon crossed bands Two interchangeable carbon quiver tips, with protective tube Naked handle, with rubber butt grip and screw reel seat Medium leg SiC wrapped guides Aluminium butt cap with rubber insert.
Allround action rods, suitable for fresh and saltwater fishing with feeders up to 60 g weight Telescopic carbon structure Joints reinforced by carbon crossed bands Two interchangeable fibreglass quiver tips, with protective tube Rubber dressed handle, with ergonomic reel seat Single leg SiC guides with incorporated rubber o-ring Aluminium butt cap with rubber insert.
Powerful and progressive action, specially designed for specialist fishing for barbel, tench or carp in canals, rivers or large lakes Avon tubular top section, with 2. Each Switch is equipped with an assembly kit, which allows an excellent level of customization of the rod. The kit includes three custom-made carbon pipes to wrap sliding guides, as well as an excellent low-profile size 6 plate reel seat for an exceptional stability.
A line mark on the handle makes it easier to fix the plate reel seat exactly at degree to the Switch logo. The handle area of butt section is coated with a fine layer of rubber, which makes it particularly comfortable. The series is made of two families of rods, according to the use they have been designed for. Lightweight and resistant wrapped plate reel seat, fitted on the ultra-conical profile handle which has the task of conferring balance to the rod.
In the foreground, the stainless steel reel seat with rubber profiled hoods. On the right, wrappings and coloured bands identify the actions one by one. The reglable system fitted on the section above butt, enables to reduce the length of these rods by one meter, adapting it to the fishing conditions.
Sliding guides on all sections of the rods, wrapped on ultralight carbon pipes. Lightweight rod with fast action and nice balance Metric scale on the butt section to help fish measurement Adjustable length system allowing to fish at different lengths Multi Length System Ultra lightweight, stainless steel medium leg guides, with incorporated ring Stainless steel plate reel seat with rubber profiles Internal screw cap with removable EVA overcap for additional protection.
Reinforcement wrapping at the base of the top section DPS graphite screw reel seat with steel and rubber hoods Smart Line clip fixed to the right side of the handle Super-slim lower rubber grip and metal cap with Trabucco logo. Special rod designed for Coregone fishing from the boat Hybrid structure, with telescopic top section, applied by spigot joint on top of butt section Butt section with adjustable length Multi-Length system Super sensitive solid carbon tip, with sliding guides wrapped on carbon pipes Natural cork handle, long enough to fit it into the armpit while fishing Reel seat made by sliding graphite hoods, also perfect for multiplier reels.
Thanks to it, the pressure to the ring is reduced half compared to the Sic. Thanks to a dramatically angled ring, Fuji solved the line tangle problem forever. A common problem which normally causes time loss, sometimes line breakage and, in worst cases, even rod breakage. On the Poetica MN range, we selected only the best components and as reel seat we used the ultra reliable Fuji Dnps gold label, entirely built by graphite it offers a great strength, ergonomic and designed to last longer.
The rounded butt cap is particularly useful to lock the rod to the groin when a big fish is being retrieved. But the conversion is gradual, within the tubular top section, and this requires high class technology to avoid weak points and curve imperfections, which would cause a bad power transfer. In spite of the thinness of their blanks, these four rods display an impressive responsiveness, governed by Twist Free technology to avoid dispersion of even a gram of the power delivered by the user.
The unusual lengths, 4,30 and 4,70 meters, follow the most recent trend and respond to the growing need to use very long hooklinks, sometimes even in the range of two meters. It is the missing link between a beach legering rod and a surf model, and, thanks to its lightness, it is ideal for Nage Japan Style fishing, which involves ultra-thin braided lines, Tenbins and very long hooklinks. Gallery View Customize.
Postal code. Shop on eBay Opens in a new window or tab Brand New. Fishing Rod Tubertini Flexo Feeder 3. Last one. Feeder Rod Opens in a new window or tab Brand New. Fishing Rod Tubertini Concept Feeder 3. Fishing Rod Tubertini R18 Feeder 3. Shipping not specified. Preston Innovations Ascension 4. Opens in a new window or tab New Other. Okuma Custom Black Feeder 3. Matrix Horizon Pro X-Class 4. Okuma Ceymar River Feeder 3.
By presenting your lure right above underwater brush and stumps you can decrease the likeliness of hang ups and thus the loss of lures. The Lightgame ICV is also perfectly suited for targeting pelagic pollack and coalfish with light tackle.
The XSL features a drag power of 11kg. Left hand version Art. The CNC-cut aluminum frame is completely distortion-proof and ensures an optimal housing of the gear even under hardest strains. The Hyper Digigear is cut out of one piece and offers perfect retrieving power. The ATD drag provides an immediate releasing of the adjusted drag without starting resistance — ideal when you are fishing with thin braided lines for big fish. The narrow spool guarantees a perfect line lay and a high line retraction — thus you can retrieve up to 96cm per handle turn within a low transmission rate of 5.
The Saltiga 35 NL-SJ is thus perfectly suiting for fishing for halibut and coalfish in the North as well as for jigging for powerful large specimen in the tropics. This reel shows its whole power especially during tough fights with halibut and coalfish in Norway — due to its digital depth counter, you can present the lure with the optimal distance to the ground - an invaluable benefit when coalfish predate in the middle water and you need to provide your lure constantly at the same depth!
Thanks to its great gear transmission and its strong Power- Gear you can retrieve your lure for a check at the surface quickly and effordless — you retrieve cm per handle turn! Due to its special construction, this reel is additionally very lightweight and allows enduring effortless fishing.
The maximum drag power of 13kg offers more than enough power to fight even with strong fish. The one-piece aluminum frame cares for high durability and an optimum housing of the gear. The ATD drag system works without starting resistance — perfect for extreme situations. The 4 CRBB are saltwater-proof and easily withstand the challenges of salt water use. The large and round EVA handle knob features a convenient handling and thus offers enormous comfort, when heavy leads have to be lifted up frequently.
For many years the Tanasensor has been called a paragon for reliability and power among Norway anglers. Especially the powerful gear is a real benchmark, which successfully has lifted up many large specimen out of great depths over the years.
The electronic display with depth counter offers great advantage when fishing in medium depth or over difficult ground, because you always know where your lure is located. The gear offers an enormous power transmission and retrieving power — indestructible under normal fishing conditions! The Tanasensor is the perfect choice when there is need for power and reliability! The automatic line lay ensures an optimal wrapping of your line — you fully can concentrate on fishing. At final winding in, the last meter of line should not be pulled through to ensure instant working of the line lay.
The powerful gear in combination with the high transmission rate of 6. TANACOM Electro reels This strong electric multiplier reel with a 12V engine provides convenient assistance at deep sea fishing for ling, redfish and cusk, when heavy rigs have to be retrieved from great depths.
The premium engine is reliably working even under high strain and offers enough power reserves to lift also big fishes up to the surface. The Tanacom can be operated by hand or via engine.
TANACOM Electro reels After the great success of the Tanacom calls for a somewhat larger model with greater line capacity and stronger engine, which can also be applied at greater depths, have grown louder. The Tanacom offers exactly these features: extreme line capacity and a very robust engine, which reliably pulls your rig to the surface also from great depths.
According to the slogan: more muscles, less fat. This is our way to construct continuously improved rods. Since this material is very expensive, it is only used for our top rods. The action is ultra fast and the notorious torque is reduced to a minimum. Usual "Pre Preg" carbon fiber At standard carbon fiber materials the resin content is very high, while the amount of carbon fiber is low.
Rods made of this material are heavier, not that well-balanced and feature a slower action than our rods made of HVF or SVF material. The reduced weight optimizes the rod action - the rod gets essentially faster and resiles clearly faster.
Additionally the use of carbon fiber framed guides reduces vibration of the guides during the cast — more precise casts are the consequence. Whoever takes a rod with AGS guides in the hand will realize immediately the dramatic difference to conventional guides and actions. Thanks to AGS the tip resiles faster. This implies less strain for the blank and results in a clearly improved resilience.
The frame construction reduces the threat of tanglings. Especially at headwind and the use of braided lines the threat of losing lures due to tanglings at the guides is high. AGS guides enable an "escape" of the line at tanglings without knots or loss of the lure. Comparison of the stiffness of carbon and titanium: Carbon features an approximately 3-fold stiffness compared to titanium and therefore is the ideal material for guide construction — the carbon frames of the AGS guide support the sensitivity of the blank like no other material.
In contrast to conventional carbon fibers, where the fabric structure always is oriented 2-dimensionally, with 3DX 3D-Cross DAIWA has developed a 3-diminsional carbon fiber material. Special carbon fiber material for the improvement of the torsion- resistance.
This construction makes the rods stronger and more distortion-proof. Despite the increased distor- tion-proofness the flexibility is maintained. This implies that X45 rods are not only stronger and cast more precisely, but also support the angler at the presentation of delicate lures and at ending the fight with the fish safely.
This "skeleton" enhances the compression, improves the flexural strength and makes the blank faster. Conventional blanks 3DX blanks Thanks to the use of 3DX carbon fiber material, the blank compression is considerably improved. The rod features always the same power transmission — regardless the direction of movement.
Additionally the rod features obviously reduced torque — more precise casts are the consequence. The hexagonal pattern is widely distributed in nature and has ever been the basis for substantial technical innovations. At our Nanoplus technology the resin material first is enriched with a nanoalloy compound and then is used for connecting the single carbon fibers, thus enabling the design of very lightweight and robust blanks.
High elasticity Low elasticity Compression Distortion Flexural strength Carbon fiber arrangement X45 offers the perfect balance of strength, control and elasticity V-Joint is a special spigot joint, where the spigot and the blank around the spigot are made of a special, exclusively for DAIWA made BIAS carbon fiber material.
The carbon fibers follow a degree angle. The consequence is higher strain resistance and an improved bending curve. By applying and combining exclusive DAIWA technologies like Super Compile-X carbon fiber, 3DX carbon fiber material, X45 carbon fiber construction, Nanoplus material and ultra-lightweight AGS carbon fiber guides extremely fast and distortion-proof rods have been created, which are incredibly lightweight and well-balanced.
The Morethan Branzino AGS rods instantly resile to the starting position after the cast and thus enable extremely long and accurate casts. The strong backbone in combination with the fast and sensitive tip action ensures security and supremacy during the fight with strong and large fishes. CW length Art. The two models with 35g casting weight offer a distinct tip action and can be applied for fishing for sea trouts with spoons as well as for medium-heavy fishing for zander and pike with shads of cm.
CW length cl. All blanks have been equipped with the latest rod design technology by Japanese DAIWA engineers and in combination with the exclusive AGS carbon fiber guides offer an incredible feeling and sensitivity at fishing. The Expert rods are real casting machines and are the perfect choice for ambitious fishing for sea trouts at the coast — of course the Morethan Expert AGS rods are also perfectly suited for fishing for zander and pike with medium-sized shads of 15cm.
The extremely fast Super SVF Compile-X carbon fiber blank with X45 carbon fiber construction and Nanoplus technology does not only allow extremely long and accurate castes but also secures optimal lure control and bite detection. The exclusive V-Joint spigot joint guarantees a perfectly harmonic bending curve under strain. The Nanoplus material cares for highest durability at the fight and enables the design of extremely lightweight but nevertheless durable rods — the 3.
The V-Joint spigot joint cares for an even bending curve and very slim blank diameters. The X45 construction allows the design of distortion-proof rods, which offer extreme accuracy at casting. It additionally reduces the risk of cracks thanks to the special arrangement of the carbon fibers. The very short upper handle section allows you to place your index finger straight on the blank for optimum lure control. Thanks to the comparably stiff action these rods are also perfectly suited for twitching plugs and stickbaits.
The extremely fast action of these premium rods transmits every contact with fish and ground straightly into the handle section, which allows an instant reaction. Thanks to the Nanoplus technology the resin content is reduced to a minimum amount at the extremely slim SVF carbon fiber blank - as a result the rods are even more lightweight and, in combination with the ultra-light DAIWA AGS guides, feature exceptional resilience. The X45 technology prevents undesired twisting of the blank and allows accurate casts also with lures, which reach the maximum casting weight.
The V-joint spigot joint cares for an even bending curve and high stability. The rods with 3. This reel seat features two notches at the side and allows immediate contact to the blank. The upper handle section has been missed out to enable straight contact to the blank - perfect preconditions for feeling even softest bites and setting the hook effectively! The rods perfectly load during the cast and catapult even smallest lures to extreme distances.
The Micro-Pitch Taping cares for maximum blank power — all blanks are unpolished and feature a distinct tip action with powerful backbone. The strong blank transfers every rod action right to the lure — during the fight with the fish the rod exhibits a semi-parabolic action, which perfectly absorbs headbutts and sudden flights.
A really extraordinary rod with trigger reel seat at highest processing quality! The Morethan Shad Attack rods have been especially designed for fishing with shads and feature strictly components of highest quality.
The extremely fast and lightweight SVF carbon fiber blank transmits every lure action as well as contact with fishes and ground straight to the angler - perfect for scanning the bottom structure and react to soft taps instantly. The X45 technology at the blank reduces torque to a minimum and allows very long and accurate casts.
The V-Joint spigot joint enables the manufacturing of extremely slim blanks and additionally provides a perfect bending curve. Thanks to the design, the Morethan Shad Attack rods appear extraordinarily noble and feature an extremely well-balanced handling. Designed with two sectioned EVA handle, ergonomic DAIWA reel seat and woven carbon fiber structure at the handle section, these spinning rods are extraordinarily nobel and lightweight as well as perfectly balanced.
The rod features a tremendous elasticity and enables greater casting distances than you are used to with much longer rods! The distinct tip action in combination with the X45 carbon fiber construction buffers every headbutt perfectly! This rod is also ideally suited for light jigging with soft plastic lures for perch and zander. The SVF carbon fiber blank features a pronounced tip action with strong backbone and is ideally suited for fishing with soft plastic lures for zander.
Soft plastic lures from cm with light and medium jigheads can be cast to extreme distances — the stiff blank transmits every contact with the bottom and every tap reliably! Also ideal for fishing for sea trouts with spoons about 25g! The SVF carbon fiber blank is very lightweight and perfectly balanced and thus enables comfortable fishing for hours. The distinct tip action in combination with the X45 carbon fiber construction allows extreme casting distances and great precision.
Due to the high carbon fiber content you can feel every contact right up to the handle and, thus, also can instantly respond to even slightest taps. If you are searching for a real longcast miracle with outstanding processing quality, this rod is the proper choice! The Luvias feature outstanding handling properties and provide perfect lure sensitivity due to the distinct tip action.
The SVF carbon fiber material allows the design of lightweight and fast blanks, thanks to the high amount of carbon fiber and the low resin content — perfect characteristics for modern rods for fishing with soft plastic lures and hardbaits! Thanks to the special arrangement of carbon fibers, the X45 technology works like a supporting wrap of the blank. Thus the X45 technology improves the resilience and the strength of the rod — longer and more accurate casts as the consequence.
The V-Joint spigot joint ensures a harmonic bending curve and offers extra stability at high strains. Lightweight original Fuji SiC K-guides easily withstand the stress caused by thin braided lines and reliably prevent tanglings due to the Fuji K-frame design. The Fuji TVS reel seat is one of the most lightweight reel seats currently available and allows instant contact to the blank thanks to its open design.
Within this large range of premium rods you surely find the matching one for fishing with shads from finesse fishing to application of heavy lures. A premium cork handle and the application of modern aluminum components complete the exquisite impression of the Luvias rods. The stiff backbone of the HVF blank transmits every action of the lure as well as bites straight to the handle.
The Fuji TVS reel seat allows you to detect everything, what happens at the end of the line and to react accordingly. The soft tip leads to very good casting distances and reliably prevents losses and material overload. Fantastic rods for catching perch, trout and chub! Thanks to their strong backbone, these rods care for a vivid action of twitched hardbaits and reliably transmit the lure action as well as bites to the handle section. The stiff action of the HVF carbon fiber blank allows the angler to choose from all modern presentation styles.
Thanks to its lateral cavities, the Fuji TVS reel seat allows direct contact to the blank and thus also to the lure. The Powermesh series comprises a range of premium and lightweight rods with superior components and latest rod design, which are especially adapted for particular fields of application.
Modern HVF carbon fiber material and X45 carbon fiber design have enabled the development of lightweight, resistant and distortion-proof blanks.
Powermesh rods thus allow precise and long casts as well as uncompromising fighting with the fish. The strong V-Joint cares for an even bending curve. Due to their light weight, the premium Fuji Alconite K-guides prevent tangles and support the fast action of these exceptional rods. The slim blank with stiff action and strong backbone allows the application of all modern presentation styles.
The action of the 2. This rod is also a good choice for vertical jigging. A perfect lure control, lure presentation and bite detection are guaranteed also at difficult surroundings. Thanks to the strong backbone you can set the hook instantaneously also over great distances. The premium and very lightweight HVF carbon fiber blanks feature the X45 technology and catapult lures of g or g over long distances with ease, thus ensuring a perfect presentation and control.
Maximum fun is guaranteed! The very stiff action allows the optimal presentation of jerkbaits up to g. The 1. Both models feature a trigger reel seat and are designed for the use of multiplier and baitcasting reels. The name "Tatula" stands for outstanding quality as well as latest technologies and innovation since years. The accurate scanning of bottom structures is of enormous importance when fishing for perch and zander with softplastic lures.
The recognition of extremely hard and soft ground is a huge advantage when it comes to finding the right spots! Also the presentation of softbaits and twitching with hardbaits is considerably easier with a fast and stiff blank. The Tatula rods unite particularly these features. The fast and very stiff blank made of SVF carbon fiber combined with the exclusive X45 technology of DAIWA allow the design of fast and very tough rods, which almost leave no wish unfulfilled.
The V-Joint spigot joint is the foundation of a truly harmonic bending curve and additionally supports the fast and even bending curve of the Tatulas. Equipped with lightweight Fuji Alconite guides, Fuji reel seat and premium split EVA handle section, these rods appear quite modern and offer large power reserves.
A very hard backbone in combination with a very fast action enables astonishing casting distances, perfect lure control and allows setting the hook without delay. Depending on the casting weight these rods are perfectly suited for fishing for pike, zander and perch with both hard and soft baits.
The extremely slim and lightweight blanks feature an astonishing handling experience and allow pleasant fishing for hours. To achieve these properties our engineers used blanks, which are manufactured by applying latest DAIWA technologies.
The HVF Nanoplus technology describes a blank with a high amount of carbon fiber at the resin. The addition of these carbon fiber elements enables the design of tough and fast rods. The X45 design prevents unwanted twists during the cast and ensures high resilience and thus a perfect lure control as well as high accuracy. The spigot joint with DAIWA V-joint technology cares for highest stability, an even bending curve as well as very slim blanks. The special processing of the carbon fiber leads to an extraordinary surface, which reflects in the sunlight and together with the premium AAA cork handle and the Fuji reel seat complete the premium appearance of this exceptional rods.
The Ballistic X spin rods for heavier casting weights are ideally suited for twitching of hardbaits and jigging of heavy plastic lures - perfect for fishing for perch, pike, asp and zander with stickbaits or when lower water layers shall be scanned with heavy lures.
The well-balanced HVF carbon fiber blanks are very handy, react quickly during the fight and offer very long and precise casts thanks to their X45 carbon fiber construction and the Fuji O-guides. The Ballistic X spinning rods are equipped with Fuji DPS reel seat and Fuji O-guides, so you get premium quality for an outstanding price-performance ratio. The light and extra fast blanks are suitable for twitching of hardbaits like small to medium poppers and plugs, as well as for vertical jigging.
During the fight the fast blanks opens up to a semi-parabolic bending curve and thus absorbs flights and headbutts of powerful salmonids. The V-joint spigot joint ensures a very even bending curve under strain.
This series comprises four rods art. Perfect for light lure fishing with small plugs and spoons of cm. The three models with tubular tip art. These rods are very convenient to handle and allow long casting distances also with small and lightweight lures. The three UL models are also suited for fishing for coregones and chars with nymph-systems and for ultra-light drop shot fishing!
The Freams series has been especially conceived for fishing for sea trout as well as for casting over long distances. These rods are also successfully applicable for fishing with softbaits and at drop shot fishing.
Remotely located perch and zanders can be targeted effectively with high precision. Thanks to the use of latest materials and technologies, like HVF carbon fibers, X45 carbon fiber design and the V-Joint spigot joint it was possible to design extraordinarily lightweight and robust rods with harmonic bending curves and high resilience. The model with 2. The 3. Especially the perfect balance of the blank has been the focus at the construction of these rods — for that reason balance weights have been integrated particularly at the handle of the 2.
Convenient fishing for hours and optimal lure control is guaranteed! The compact pack size of 67cm or 75cm allows easy transportation in the suitcase or rucksack. Perfectly designed V-Joint connections care for an even bending curve and provide additional toughness.
The balance and action are hard to distinguish from a premium two-sectioned spinning rod. Consequently, these rods exhibit the perfect characteristics to target remote spots also with small lures of only 3—12gr and to set the hook over long distances. The soft tip is ideally suited for sensitive bite detection with the Cheburashka rig. Any contact with the lure, bottom or fish is instantly transmitted to the handle section, enabling the scanning of bottom structures and the immediate reaction to even softest taps.
Perfect for perch, asp, trout or chub! Quality components, like the lightweight titanium oxide guides with slim inlays and the AAA-grade natural cork handle significantly contribute to the pleasant balance of these rods. The high modulus carbon fiber blank transmits the lure action, as well as ground and fish contact, instantly to the handle section and offers enough power to set the hook also over long distances.
The semi- parabolic blank excellently loads during the cast and allows enormous casting distances with lures from g. The soft action of the tip buffers sudden flights, headbutts and jumps easily, especially in the close distance, and reliably prevents unhooking.
Thanks to the convenient handling this rod allows fatigue-free fishing over hours. These tips, which are almost unbreakable under normal fishing conditions, catapult ultra-small lures to good casting distances and reliably indicate also softest taps. The models with 2. Due to the fast blanks the Fuego Camo rods are especially suited for jigging with soft plastic lures. These rods feature a modern look due to the trendy gray color and are equipped with an original Seaguide reel seat and premium camouflage EVA handles.
The premium reel seat from the Seaguide Alien concept allows instant contact to the blank due to the lateral pockets, which optimize lure presentation and bite detection. The ergonomic shape of the reel seat further guarantees comfortable handling and enables permanent fun at fishing. Equipped with light titanium oxide guides.
The action of the rods is designed to facilitate great casting distances with shads, plugs or spoons of 50gr or 60gr. Despite their short division in four sections these rods are very fast and durable, feature a comfortable handling and display an even bending curve powered by the V-Joint design, which otherwise is only known from two-sectioned rods. The slim and well-balanced HVF carbon fiber blank features a pleasant handling, enables long casts and cares for a precise bite detection.
During the fight the quick blanks offer enough power reserves to direct also large specimen securely. The V-Joint spigot joint cares for an even bending curve and extra stability under strain.
Equipped with titanium oxide guides and premium Japan-style EVA handle! These rods are real all-rounders. Ideal for fishing with softplastic lures, plugs, spoons and spinners. The handle section offers great power reserves to be able to force even big fish during the fight. CW cl. The thin carbon fiber blank is very handy and well balanced and offers a great contact to the lure. Especially when using with soft plastic lures you can perfectly scan the ground conditions and detect every softest tap.
The action and bending curve of the strong backbone have been designed to provide pure fun at the fight while reducing losses at the same time.
X-Wraps at the blank surface contribute to the torsion resistance, enlarge the precision of casts and provide stability at the fight with large specimen. The fast HVF blank transmits every movement of the lure, ground conditions and contact to the fish directly to the handle and thus enables a prompt setting of the hook.
The Ninja X jiggerspin rods are also perfectly suited for usage with small spoons and spinners. The small, orange varnish at the tip guide enables a good bite detection even under difficult light conditions.
Due to the short closed length, these rods can be transported easily with the bicycle or in the train and can be used perfectly at hardly accessible waters. The length of 1. The blank and the titanium oxide double leg guides of the Ninja X Kids also withstand toughest strains. Available in two colors — blue art. The broad range covers a multitude of casting weights and lengths, thus providing the proper rod for every situation at spin fishing. The blank is extraordinary within this price segment and significantly contributes to the pleasant handling of these rods.
The models of 40g casting weight and above offer a quick and stiff action, which leads to a perfect lure control and bite detection, particularly when softbaits and plugs are used. Classic hookbaits for this pattern are hair-rigged pellets, sweetcorn and boilies. Wire is oversized to grant extreme strength, specially because big Carp often feed at short distance, while the barbless point is not profiled like a needle, but starts from a thick base for extra power.
Nice and neat, wide, comfortable hook, same as the other Wide Gape Carp, but barbless. With such design, it can accommodate any bait, while the super sharp beak point eases hookbait formation and grants deep penetration, also in case of foulhooking, not so rare in the commercial. The range of sizes include those tricky 18 and 20 for single maggot, a winner in case of topwater fishing. When any load is applied on to the point tip, the bend reacts, thus causing the safe penetration in the fish mouth.
Then, if the super high point is considered, the safety feeling reaches the top. What else? Just add the pellets you like, or a bunch of dead maggots, and your wait will be rewarded. It is the micro-barbed version of the Power Specialist series, a pattern destined to get trusted by thousands of anglers, from the champions of commercial competition to expert hunters of record fish in open waters. Chub, roach, crucian carp and bream are its main targets, although its structure does not fear anything in case of striking into any bonus fish.
Perfect with maggots and casters, it is also comfortable with earthworms and sweetcorn, lending itself to all the most creative cocktails of these natural baits. Its needle point, rather long, is slightly tilted inwards to provide an exceptional holding power. It has a lot of power to spare, this classic feeder hook, designed to arrange nice presentations of pellets and mini boilies when fishing for carp, barbel and clarius.
The only concession to the kindness is given by barb size, very small, although this detail is motivated by the need to enhance the self-hooking property, a peculiar trait of the method feeder technique. The slightly out-turned eye favors the Knotless Knot hair rig tying, the one-way contamination from carp fishing in the modern feeder area. The out-turned eye eliminates stress on the hooklink, while the anti-glare finish adds a subtle effect.
It is a straight, spaded end hook designed with a light enough structure to face silver fish match conditions with living baits, but at the same time it can provide a certain strength, due to the forged bend.
Its shape is capable of absorbing very high pulls, unavoidable when the reel is loaded with braided lines or when the fishing site hosts mixed populations: so the bonus carp that interrupts the regular catches of bream and carassios does not cause any heart attack. The arched and in-turned high point is a guarantee of safe holding, especially in those delicate retrieves of important fish from remarkable distances.
This feature puts it on the fore front when tough fishing is the norm, a typical condition of the last hour in the match or during the cold season, when even the most shy bite must absolutely be converted into a catch. It is identical to the Match Specialist in all physical features, but has the micro barb on the long beak point.
For those who feel the need of micro barb, it is present, but without excessive volume that would affect the penetration ease. The hook profile is straight. Perfect for hair rig presentation of pellet and sweetcorn on the bottom, it comes from a classic carp hook design, which has been modified at barb area, drastically reduced to micro size. The series has been developed to provide high levels of resistance even in small sizes such as 14 and 16, because today it is increasingly common to tempt big fish with tiny bait, in the commercial circuit but also in the open waters.
A strategy that can relive the attention of fish when they have already taken plenty of food. Either way, a nice program in any fishing situation involving high stress and extreme pulls, because exceeding in the resistance never hurts. The forged bend is ready to bear everything, strictly cooperating with the high, beaked point.
In the larger sizes, it is ideal for hair-rigged mini boilies, now permanently present in the bait bag of all commercial fans. The Knotless Knot can be used with any type of hooklink material: nylon, fluorocarbon, braided line, and all hook patterns. Before you implement the steps outlined here, you should form a small loop at the end of the hooklink, which will be useful to lock the bait.
Moisten the knot and tighten it. A drop of glue can fix it. Within the Trabucco range, Shinken is the hook family mostly oriented to saltwater fishing, with its great resistance to acute traction and aggression of the saline environment.
Alongside the classic hooks for natural baits, there are many series designed for application on lures, with single, double and treble models of superior quality. One of the strength points of the Shinken hooks consists of the 3D Cut points, characterized by a three-sided design to develop an enormous penetrating force, necessary to get the best out of certain tough mouths.
Spade hook with medium curve shank. Designed to be used with fragile baits, including live prawn. Light weight but really strong hook with a super high penetration point. It is the perfect hook for sea bream fishing gilt-head. Specific hook for long and fragile worms commonly used in sea fishing, with a light but resistant structure, thanks to the forged curve.
The special design of its profile facilitates the penetration of the point, which is almost parallel to the hoohlink. Strong medium shank hook, light weight and equipped with quick, deep penetrating 3D-Cut Point. The ideal hook for all bottom fishing techniques. Special hook, specifically designed for Surf Casting. Medium shank and aligned eye, light weight and high penetration needle point. Light but strong.
Super strong micro-barbed hooks. A true allrounder can be used both for sea fishing as well as freshwater, the smaller sizes can be well employed also for feeder fishing.
Available in a wide range of sizes. Super resistant medium wire hooks for heavy fishing and carp fishing. Short shank, beaked point. Strong medium shank hook, light weight and equipped with quick, deep penetrating.
The perfect choice forheavy duty fishing in salt and fresh water. Super strong spade hook for heavy duty fishing in salt water. The 3D-Cut Point grants a perfect hookset. Dsigned for heavy duty fishing that require reliable hooks.
TiN plated stainless steel hook. Extremely strong and reliable. Designed for live bait trolling and drifting. TiN plated stainless steel hook double reinforced toward standard Payao. Designed for extreme live bait trolling and drifting.
Aki hooks are super strong thanks to the forged shank and features a deep penetration thanks to the 3D-Cut Point. Ideal for all challenging salt water fishing techniques. Colour: Black Chrome. Very strong spade hook designed to be used for Madai fishing. High penetration 3D-Cut Point.
One of the most used hooks ever. According to the size you can use these hooks for a variety of techniques, from salmon and steelhead fishing to offshore trolling. Super reliable thanks to the 3D-Cut Point. A highly specialized pattern, designed for livebait trolling rigs involving two different kooks, the most advanced solution for Squid, Cuttlefish or any other fishbait in search of Dentex, Grouper or Amberjack. A highly specialized pattern, designed for livebait trolling rigs involving with two different kooks.
The in-line eye makes it perfect to work as catching hook. Being located at the end of the rig, this is the hook which bears the traction during the battle with big fish such as Dentex, Grouper, Amberjack.
Specific for the deep sea fishing, they are lighter than the Mutsu Circle , but they share with it the very high percentage of catches and the exceptional grip and hold properties, making the strike almost useless.
It is able to self position in the correct way inside the fish mouth and always allows catch and release action. Specific series of barbed hooks to be used to replace wobblers trebles. Made with high-carbon steel. Specific series of barbless hooks to be used to replace wobblers trebles. Specific series of barbed hooks to be used to replace spoons and spinners trebles. Special super fine shank series of barbless hooks to be used to replace spoons and spinners trebles. And this is exactly its field of application, where it excels for its strength and resistance to salt, assured by TiN finish, which protects from corrosion the steel structure with high carbon content.
Double hook featuring a triple-strength structure, which makes it ideal for hard life, such as spinning and trolling for sea predators, where any excess of muscles is often worth. After all, the stratospheric quality equipment is useless if the last link in the chain is not up to the task!
The high carbon content steel structure provides the required strength and penetration attitude, while the duration is ensured by the TiN protection. The two stems are separated to facilitate the replacement of these hooks on artificial bait. The special blister contains an EVA board, which prevents the hooks from harming each other during transport, while it makes them individually visible when they are displayed in the shop. STN The ShinkenT- 56 trebles are 3X-Strong with a corrosion-resistant black chrome finish and are perfect replacement hooks for improving hooking power of your lures.
Feature a short shank, forged bends, and three straight needle points. The 2X strong ShinkenT trebles are perfect for replacing old crankbait and plug hooks, both for fresh and salt water fishing. Slightly curved 3D-Cut Point allows for quick, deep penetration. Round bend and needle points hooks for wide-gap hooking efficiency. ShinkenT trebles are extremely strong, reliable and light weight. They are the best you can get for your salt water lures. The straight needle point grants super deep and fast hook set.
The smaller sizes find space in the tackle box of any demanding matchman, who pays attention to the lightness of the hook to obtain perfect presentations. The largest sizes are suitable for trout fishing in difficult conditions, with honey worm and delicate aquatic larvae.
Nickel finish is an evergreen solution to get wide acceptance from the whole world. A timeless classic in lake trout fishing, made much more advanced through the reduction of the barb size to a bare minimum. The nickel finish protects the point tip from wear and, at the same time, with its flashes adds attractiveness to the hookbait.
It is recommended to snell it with a baitholding barb, facing upright. An excellent lake trout hook, with a long shank that eases quick baiting and an unique, two steps bend which increases the overall efficiency, reducing the percentage of missed bites or fish loss during retrieve. With its forged bend, it offers the required strength to lift trout off the water without risks.
Classic nickel finish, which adds attractiveness to the hookbait. The long shank is a classic for the earthworm; the bend is forged to provide the necessary strength to lift trout from water. A multi-purpose hook, a real wild card to be played in the lake trout fishing with honey worms or earthworms when fishing is easy, specially at the start of the match, but also at sea with maggots, considering its proven strength and its deadly hooking capacity.
Consequently, the point tip keeps its sharp profile even after tens of catches. Feeder fishing at sea is discovering unexplored opportunities, and it is known that the strength of Gilt Head Bream and Sea Bream requires hooks of proven reliability.
It is advisable to tie the hook on the shank, passing line through the eye to limit the stress on it and keep a perfect alignment to the shank. It is a XN legitimate son, the classic long shank hook that plays a leading role in the XPS range, in freshwater as well as in the sea.
In fact, all the chromosomes are in place: the long shank, the marked elbow, the nickel finish, the special balance between lightness and strength of the structure and the quite wide range of sizes. The main difference is the eye, required by surf casting, beach legering and boat fishing experts for its superior versatility about knotting chances and consequent reliability in case of big fish.
In Japan, this hook pattern is highly popular because of its great penetration and holding capacity, which is eased by the microscopic size of the barb. Perfect for the classic range of natural baits, such as maggot, earthworm, sweetcorn, also impeccably houses a pellet, keeping it in place with the deep, angled bend and with the inturned point. The bomb-proof strength makes it reliable at sea too, where feeder proves to be a winning approach.
Black Nickel finish protects the point from the aggression of the salt and the abrasions resulting from harsh life within the waves. Widely adopted as one of the most efficient surfcasting hooks, the F is now available also with two barbs on the long shank: one inside and the other outside.
They are cooperating as wonderful bait holders, specially with long worms which tend to slide down during the cast. Black Nickel finish provides abrasion protection to the point tip, which is always at risk between the waves in salty and sandy environment.
The beak point grants penetration and holding properties, while the long shank offers room for long worms, easing both baiting and disgorging operations. Semi-forged hook, ringed, with heavy duty point.
The smaller sizes can be used also for big predator in fresh water, perfect for deep sea fishing. The true connoisseurs of Chub fishing, will surely welcome this beautiful straight hook, eyed and finished in Black Nickel to last longer and look unobtrusive in crystal clear waters. Tie it in a loop for the maximum mobility and total reliability, and go with maggots and casters to tease the prince of all rivers.
Semi-forged, special anti corrosion black nickel finish. High self-hooking ratio, this hook is perfect for deep sea fishing using natural baits. Ringed hook with forged and semi-banded shank. The long and sharp point can penetrate even the hardest sea predator mouth.
Can be used also to rig big live bait in fresh water. Black nickel finish. Ringed hook with semi-forged shank. Two micro barb help to fit the bait on the hook, very helpfull when using long and delicated worms or particullary soft baits. Can be used in many different situation, both from the shore or from the boat, black nickel finish.
Ringed hook, black nickel finish. Made using high carbon steel and extreme sharp point. Can be used for surf casting or boat fishing. This shape is absolutely the most popular and effective to fish for european catfish with live baits.
Big sized barb allows to fight the fish for long time without any risk. The wide shape is perfect to rig big livebaits. Black Nickel finish. Three of the hook patterns that make it up belong to the super strong class, the fourth one is essential for fishing with maggots, still the most effective bait, both in fresh and saltwater environments.
A couple of bait barbs characterize the back side of this robust eyed hook, putting it to the attention of those who employ worms of all kinds, because they remain in place even during extreme casts. The Hisashi snelling with the knot forming a further 3 mm line barb offers the possibility to slide the living bait up on the line, leaving the curve completely free to work.
Two small barbs, located on the outside of the shank, firmly secure the bait. Designed in northern Europe over two hundred years ago, it is still a favorite for those who hunt for big fish, especially at sea. Featuring a very robust structure, it offers a rather long shank that easily houses small fish fillets and squid stripes, but also long worms. Straight, medium light shank hook, which exploits the relative lightness to also be effective in the difficult fishing, when it seems that there are no fish around, but a sudden change does the job.
The long shank allows to accommodate a wide variety of baits: from maggots to earthworms, including cocktails, from sweetcorn to fruits, from bread to shrimp meat. BN Black Nickel cm A worldwide classic for bottom fishing in freshwater and at sea, from the shore as well as from the boat. Thanks to the design of its wide bend and the beak profile of the point, it provides absolute guarantees in terms of penetration and holding capacity during the fight. The wide range of sizes makes it ideal for hooking worms, crabs, shellfish and paste baits.
The famous Uni-Knot, also known as Grinner Knot, is one of the best to connect the line to an eyed hook. The knot ends with a 3 mm barb which acts as bait holder. By all means the best surfcasting and beach legering hook, thanks to a special balance between lightness and strength, ideal for natural presentations, and to the availability of small sizes, preferred by match anglers in the most difficult conditions.
Its beak point grips even when the strike is not perfect, and his holding capacity is proverbial. It is the bad brother of F, from which it differs mainly for the higher thickness of the steel structure, to the slightly shorter shank and the much narrower angle between the curve and the point, features that recommend it to be used in the most stressful conditions, such as the prospect of catching bigger fish or a short distance fishing range.
It has been named after a coastal city in eastern Scotland, where it was developed for surf casting and where his versatility consecrated it also for the boat fishing.
The long shank eases both the hooking operations of worms, fish or squid fillet, and its removal from the mouth of the fish the angler intend to catch and release.
The twin length option, with and cm of line, solves all the problems of speedy as well as scratching fishing, while the twisted loop, paired with a PVC tube, accelerates and simplifies the fast connection to the specific hooked swivels. A double system of bends characterizes the shape and the extreme overall effectiveness of this wonderful hook, reducing the incidence of strike failure and that of fish losses during retrieve.
The angle at the base of the point is critical to grant the hookbait rotation, while the forged curve provides the necessary strength in the trout lifting from the water. An absolute classic in the trout field, straight and modern, thanks to the presence of micro barb that does not damage the delicate worms, facilitating the penetration and fast unhooking with your finger. Black nickel plated hook, round wire, long shank, special safety bend, chemically sharpened needle point, micro barb.
For trout and tough fish fishing. Nickel-plated hook, round wire, long shank, special safety bend, chemically sharpened needle point and high resistance micro barb. Recommended bait: silkworm, salmon eggs, worms.
Bronzed series developed for trout fishing. Semi-forged, medium wire long shank and special safety bend. Chemically sharpened. Bronzed, semi-forged with short shank bend and very strong wire. Round safety bend and chemically sharpened extra sharp point. Ideal for carp. Nickel plated hook, with round and thin wire, long shank, narrow bend, microbarb, high penetration chemically sharpened point.
Universal purpose either in inland waters and at sea. Recommended bait: molluscs, salmon eggs, silkworm, shrimps and bloodworm. Nickel plated hook, round and thin wire, round bend, micro barb and chemical sharpened needle point. Excellent for inland water game fishing. Recommended baits: silkworms, worms, corn, casters and bloodworm. Black nickel plated hook, round and medium-thin wire, long shank, wide bend, micro barb and chemically sharpened needle point. Especially meant for competitions, excellent for bream, roach, carp and chub.
Recommended baits: bloodworm, worms, corn, silkworms, casters. Nickel plated long shank hook, medium wire, high resistance barb and high penetration point. Universal purpose. Nickel-plated hook with long shank, medium-thin round wire. Properly designed for mullet fishing.
Recommended baits: paste, bread and silkworms. Nickel plated hook, semi-forged, short-shank, strong wire, anti-disgorging round bend, reversed and chemically sharpened point. Micro barbs on the shank to keep a perfect baiting even after casting. Highly recommended for sea fishing. Nickel plated hook, semi-forged medium thin wire, semi-short shank, safety round bend, chemically sharpened point and micro barb.
Excellent for sea fish. Black nickel plated hook, wide bend, medium shank, high penetration chemically sharpened point and micro barb. Recommended baits: silk worms, corn, bloodworm, caster, etc. Golden hook, medium shank, wide bend, high resistance micro barb and chemically sharpened point. For cyprinids in general, and excellent in competition. A microbarb on the shank ensures the fastening of the bait on the hook. For sea fishing when dealing with live baits.
Nickel plated hook, medium-short shank, wide bend and chemically sharpened reversed point, medium-thin wire, with anti-disgorging barb. Ideal for inland waters game fishing and at sea. Designed for surfcasting, beachcasting and light depth fishing.
Featuring a round bend, medium wire, black finish and ringed. Very good hook for deep fishing to sea bass, sea perch and snappers. Finish black nickel and with spaded shank. Nickel plated straight hook, long shank, round bend, with chemically sharpened point. Best performance when used at sea and freshwater. Round bend ringed hook, red plated, chemically sharpened high penetration needle point and medium wire.
Recommended for surfcasting, beachcasting and light depth sea fishing. Nickel plated hook with large wire and round bend. High penetration point and anti-disgorging barb. Designed for mackerel fishing. Black nickel plated hook, semi-forged wire and chemically sharpened reversed needle point.
Safety round bend, short-shank and high resistance barb. Excellent for sea fishing with live bait, both trolling or at depth. Semi-forged, long shanked hook, with semi-round bend. Made of carbon special steel. Featuring high penetration point and safety barb. Very strong.
DEFAULT
DEFAULT
DEFAULT
DEFAULT
Feeder concept tournament 90 3.90 free.Meškerė Feeder Concept Tournament
So all the rod with Twist Free technology perform like a knife, This concept is applied both on the original sections of the poles and. TRABUCCO PRECISION RPL RIVER FEEDER 13ft/ 3,90m HH gr. Feeder Rod - $ FOR SALE! 13 cm 3+2 HH gr S-SiC. Carbon Feeder Rod. So all the rod with Twist Free technology perform like a knife, The concept starts from the physical characteristics of the human eye.
DEFAULT
DEFAULT
DEFAULT
DEFAULT
3 comment